CREAM HARDENER (DIBENZOYL PEROXIDE PASTE)

Description
Non-separating cream hardener formulated for use in premium, lightweight, heavyweight and specialty fillers as well as finishing and blending putty.  Cures fillers and putties.

Mix Ratio
As directed with filler or putty

The right hardener ensures precise curing and ultimate performance. 

The Concept Paints EP41 Hardener has anti-corrosive properties, outstanding flexibility, chemical and water resistance when used alongside the EP41 Epoxy Primer.  

For more information in relation to the product view the Technical Data Sheet below:

https://conceptpaints.com.au/sites/default/files/content/EP41%20Epoxy%20Primer.pdf 

A fast curing 2K hardener in a premium blend of solvents.

This universal 2 Pack Polyurethane Hardener is optimised for a variety of 2K MS Clears, Topcoats and HS Primers.

Provides fast dry and brilliant gloss in a range of 2K topcoats.

This universal 2 Pack Polyurethane Hardener is optimised for a variety of 2K MS Clears, Topcoats and HS Primers.

Provides fast dry and brilliant gloss in a range of 2K topcoats.

A range of universal 2 Pack Hardeners (MS) specifically designed for use with Polyurethane Paints.

The Concept MS-22 Hardener when used with the MS-22 Clear has superior flow, producing a very high gloss finish, with exceptional chemical resistance, durability and hardness.

For more information in relation to the product view the Technical Data Sheet below-

https://conceptpaints.com.au/sites/default/files/content/MS-22%202K%20Clear_0.pdf

This is a 2K Direct Gloss in the Code Toyota 058.

Pre-mixed and just needs MS or HS hardener (not included)

Mixing Ratio  2:1 

Suitable for most Toyota colours with colour code 058.

Substrate Preparation

•        All surfaces must be thoroughly sanded and cleaned with a Wax & Grease Remover prior to application.

•        Use white or light-coloured primers under bright yellows, oranges, and reds, if required.

Product Preparation

•        Weigh the tinters into the required base in accordance with the relevant colour formula.

•        Stir or shake for 10 minutes minimum.

•        Never leave the mixture stand for more than 30 minutes before mixing.

•        Check the colour match before application.

Mixing ratio2:1 (by volume)

•        2 parts Schubert’s 2K Colour

•        1 Part Schubert’s Hardener

Reduce

•        Add between 10%-20% (v/v) of Schuberts 2K Thinner, if required.

Potlife @ 25°C (77°F)

•        2-3 Hours

Spray viscosity @ 25°C (77°F)

•        BSB 4 Cup 17-18 s

•        Ford 4 Cup 15-16 s

Number of Coats

2-3 Coats 

Ratio: 2:1 with MS or HS hardener (not included)

Pre-mixed.

Suitable for most Ford colours with colour code A1.

Substrate Preparation

•        All surfaces must be thoroughly sanded and cleaned with a Wax & Grease Remover prior to application.

•        Use white or light-coloured primers under bright yellows, oranges, and reds, if required.

Product Preparation

•        Weigh the tinters into the required base in accordance with the relevant colour formula.

•        Stir or shake for 10 minutes minimum.

•        Never leave the mixture stand for more than 30 minutes before mixing.

•        Check the colour match before application.

Mixing ratio2:1 (by volume)

•        2 parts Schubert’s 2K Colour

•        1 Part Schubert’s Hardener

Reduce

•        Add between 10%-20% (v/v) of Schuberts 2K Thinner, if required.

Potlife @ 25°C (77°F)

•        2-3 Hours

Spray viscosity @ 25°C (77°F)

•        BSB 4 Cup 17-18 s

•        Ford 4 Cup 15-16 s

Number of Coats

•        2-3 Coats

The Concept MS-22 Fast Hardener when used with the MS-22 Clear has superior flow, producing a very high gloss finish, with exceptional chemical resistance, durability and hardness.

For more information in relation to the product view the Technical Data Sheet below-

https://conceptpaints.com.au/sites/default/files/content/MS-22%202K%20Clear_0.pdf

Ratio: 2:1 with MS or HS hardener (not included)

Pre-mixed.

Suitable for most Toyota colours with colour code 061.

Substrate Preparation

•        All surfaces must be thoroughly sanded and cleaned with a Wax & Grease Remover prior to application.

•        Use white or light-coloured primers under bright yellows, oranges, and reds, if required.

Product Preparation

•        Weigh the tinters into the required base in accordance with the relevant colour formula.

•        Stir or shake for 10 minutes minimum.

•        Never leave the mixture stand for more than 30 minutes before mixing.

•        Check the colour match before application.

Mixing ratio2:1 (by volume)

•        2 parts Schubert’s 2K Colour

•        1 Part Schubert’s Hardener

Reduce

•        Add between 10%-20% (v/v) of Schuberts 2K Thinner, if required.

Potlife @ 25°C (77°F)

•        2-3 Hours

Spray viscosity @ 25°C (77°F)

•        BSB 4 Cup 17-18 s

•        Ford 4 Cup 15-16 s

Number of Coats

•        2-3 Coats 

Concept 2K Matt Black is a high performance 2K Black coat, designed specifically to achieve a matt finish (1015% gloss level), replicating the latest OEM matt offering. It is characterized by excellent flow, high chemical resistance, and hardness properties.  

This includes:

1 x 2K Matt Black (1LT)

Key Properties

•        High performance

•        Fast drying

•        Excellent through cure

•        Excellent levelling and flow

•        Even matt gloss effect

For more information in relation to the product view the Technical Data Sheet below-

https://conceptpaints.com.au/sites/default/files/content/2K%20Matt%20Black%20TDS.pdf