SR 221 should always be used for particle, gas and combined filters.

The pre-filter protects the main filter against premature clogging by larger particles.

This kit is ideal for Spray painting with water bases paint or solvent based paint in open, ventilated areas. Also can be used for spraying organic weed killers, insecticides or using high pressure washers with additives.

P3 Filter: Used against all types of wet and dry particles, such as dust, smoke, aerosols, spray, asbestos, bacteria, viruses and mould. It removes 99.997% of all particles from the air you breathe. Other particle filters with lower filters can not filter out particles to the same extent as your P3 filter.

A1 Filter: Used against organic gas and vapour with a boiling point above +65°C, such as solvents. The filter has regular (class 1) capacity.

Dimensions of the box are about 26 cm long, 188 cm wide and 12cm high.

This kit contains:

1 x Half mask SR900-3 (TPE) size Medium

1 x Gas filter A1 (SR 217) [Class 1: suitable for a max concentration of toxic substances at a rate of 0.1 vol. % or 1000 ppm.]

1 x Particle filter P3 (SR510)

5 x Pre-filters (221-1)

1 x Pre-filter holder

1 x Cleaning Napkin

1 x Storage box

Sundstrom Gas Filter A2 SR218

The Sundström SR100 silicone half face respirator in the Sundstrom PRO Kit  is designed for heavy-duty work during extended periods.

All kits include mask, filter(s), pre-filters, pre-filter holder, cleaning tissue and user manual, all contained in a rugged plastic box with carry handle.

P3 Filter: Used against all types of wet and dry particles, such as dust, smoke, aerosols, spray, asbestos, bacteria, viruses and mould.  It removes 99.997% of all particles from the air you breathe. Other particle filters with lower filters can not filter out particles to the same extent as your P3 filter.

ABEK1 Filter: Used against vapour from organic gases whose boiling point exceeds +65°C (150F), for inorganic gas, and for acid gas and vapour.The filter has regular (class 1) capacity.

Compliance: Certified to AS/NZS 1716:2012

*this listing is for the white hood only*

The Sundstrom SR64 Protective Hood is designed for use together with Sundström half masks and full face masks with filters or the SR 307 compressed air attachment, and with the SR 90 Airline.

The hood provides protection against dust and particles, and against a minor amount of splashing and dripping.

The SR 64 is made of non-woven material (Tyvec) and can be uséd in any situation in which a half mask can be employed.

However, the hood does not provide protection against toxic, aggressive or irritating vapours or aerosols.

The hood is intended for short-time use and is not suitable for cleaning.

Sundstrom SR100 Premium Kit Size: Medium/Large

SR 100 is made of silicone and is equipped with two exhalation valves, which ensures very low exhalation resistance. Valve covers with baffles effectively protect the exhalation membrane against dust and paint mist. The easily adjustable elastic head harness of the mask is designed as a V-shaped loop and has a large, dished crown plate, which contributes towards a comfortable and secure fit.

Dimensions of the box are about 26 cm long, 188 cm wide and 12cm high.

Premium Pack includes;

• 1 x Half mask SR100 (Size: Medium/Large)
• 1 x Gas Filter A1 (217)
• 1 x Particle filter P3 SR510
• 1 x Pre-filter holder
• 5 x Pre-filter
• 1 x Cleaning Napkin
• 1 x Storage Containe