U-POL – Spectra Paints

Upol System 20 2K HS Clear Kit 7.5lt

admin — Fri, 25 Sep 2026 05:02:09 +0000

Upol System 20 2K HS Clear Kit 7.5lt

U-POL System 20 Brilliant HS Clearcoat is a 2K high solids clearcoat designed to reproduce a manufacturer’s original finish. It provides good flow and non-sag properties and hardens rapidly to give a high-build, UV-resistant coating with excellent gloss and long-term durability.

Suitable for all types of paintwork applications
High-build finish
Excellent gloss
UV resistant
Good flow and non-sag properties
Rapid hardening
Long-term durability
2:1 mixing ratio

Upol MicroFill Pinhole Eliminator & Sealer 200mL

admin — Fri, 25 Sep 2026 03:50:14 +0000

Upol MicroFill Pinhole Eliminator & Sealer 200mL

U-POL MicroFill is a dark grey, 1K wipe-on paste designed to eliminate micro pinholes and scratches after sanding. It helps seal the repair surface before priming and contains an adhesion promoter.

Ready to use
No sanding required after application
Ready for painting in approximately 15 minutes at 20°C
Helps reduce primer consumption
Suitable for use before priming

Upol Grey Stripe Brushable Seam Sealer 1kg

admin — Mon, 01 Dec 2025 01:22:05 +0000

UPOL Grey Stripe Brushable Seam Sealer 1kg

Flexible brushable seam sealer for overcoating welded joints. Ideal for use in luggage and engine compartments to recreate the original finish.

Fast drying, one coat application
Non string formula, clean, quick and easy to apply
Overpaint with most paint systems

Upol Guide #7 Dry Guide Coat Aerosol 450ml

admin — Thu, 09 Oct 2025 03:34:49 +0000

High-Performance Dry Powder Guide Coat

A professional-grade guide coat designed to highlight surface imperfections during the sanding of fillers or primers. This dry powder formula offers precise visibility for flaws without compromising your sanding process.

Key Features:

Does not clog or block abrasives, ensuring maximum sanding efficiency
Ideal for both dry and wet sanding applications
Dries instantly – no waiting time, so you can sand immediately

Perfect for use in automotive refinishing, industrial work, or any high-precision surface preparation.

For more information in relation to the product view the Technical Data Sheet below-

https://u-pol.com/au/product/aerosols/premium-aerosols/guide7-dry-guide-coat/

Upol HS Solid Brilliant White S20600/5 5lt

admin — Wed, 08 Oct 2025 01:54:03 +0000

U-POL System 20 HS Solid Brilliant White – 5L

High quality acrylic solid colour
Designed for direct application over U-POL primers
Easy to polish when cured by air, low bake, or infrared (IR)
High build, UV-resistant coating
Excellent hiding power, gloss, and long-term durability
Use with S2030, S2032, or S2033 hardener

For more information in relation to the product view the Technical Data Sheet below-

https://u-pol.com/au/sds-tds/

CAM Green Tape 18mm X 50M (Sleeve of 12 Rolls)

admin — Tue, 07 Oct 2025 02:29:25 +0000

CAM GREEN TAPE SLEEVE OF 12 18MM X 50M

CAM Bear Green Automotive Tape is a high-quality masking tape designed for superior adhesion on a wide range of surfaces, including mouldings, plastic, glass, metal, rubber, and painted finishes. Available in widths of 18mm, 33mm, and 45mm, with a length of 50 meters, this tape delivers excellent performance for automotive applications.

Upol Isopon P40 Fibre Glass Filler With Hardener and Applicator. 250ml Tub

admin — Thu, 11 Sep 2025 03:32:10 +0000

Upol Isopon P40 Fibre Glass Filler with Hardener and Applicator. 250ml Tub

Fibre glass reinforced ISOPON P.40 BODY FILLER FOR HOLES is the ideal choice for repairing holes up to 75mm wide in most types of metal. It’s easy to mix and can be used with ISOPON Aluminum Mesh to bridge larger holes and give a tough, durable repair. Just follow the simple instructions in the guide for a quick and easy repair that’s ready for finishing.

STEP – 1. PREPERATION

Wearing protective gloves, grind away or cut out any rust and hammer back any sharp edges of the damage area.
Remove any paint from the damaged area and approximately 25mm around it with a course grit sandpaper roughen the bare metal surface.
Wipe away loose particles and remove any grease. The area should now be clean, dry and free from loose paint, rust, grit and grease.

STEP 2 – MIXING

Measure out required amount of hardener and paste. As a simple guide to the ratio, you will need ‘golf ball’ size of paste to 2 ‘peas’ size of hardener.
Using the applicator, mix the paste and hardener together on a clean surface until you get a uniform colour. Thorough mixing is important to ensure best results.

STEP 3 – APPLICATION

Apply the P.40 Body Filler for Holes in one layer so the final surface is not quite flush with the surface.

For larger holes over 25mm wide-

Cut a piece of aluminum mesh 25mm larger than the hole before mixing the P.40 Body Filler for Holes to affix the mesh to the underside of the repair.

When set, mix up more P.40 Body Filler for Holes and apply a layer to cover the mesh (including the clean, dry metal around it). Allow to dry for 20-30 minutes.
When dry, you will effectively have a mesh plate that is ‘welded’ to the underside of the repair. The indentation and surface of the prepared area can now be filled with P.38 multi-purpose body filler.

For more information in relation to the product view the Technical Data Sheet below:

https://u-pol.com/wp-content/uploads/P40-AU-TDS-EN.pdf?utm_source

Upol 2K Direct Gloss, Touch Up Paint in Aerosol. Solid Colour Code 400ml

admin — Thu, 03 Jul 2025 01:06:14 +0000

Upol 2K Direct Gloss, Touch Up Paint in Aerosol. Solid Colour Code 400ml

Any 2K Direct Gloss colour code mixed and put in Aerosol can. All you need to do is send your colour code along with the Make, Model and Year.

*DISCLAIMER*Our paint system may slightly differ to other paint systems. We do our best to ensure the accuracy of the paint code given. However we do not guarantee that the colour will match and the colour may slightly vary.

Raptor Anti-Corrosive Epoxy Primer 1.5Lt Kit 4:1

admin — Fri, 04 Apr 2025 03:36:52 +0000

The RAPTOR Anti-Corrosive Epoxy Primer is a high performance 2k primer.

It contains a blend of anti-corrosive additives to help inhibit rust and corrosion and has excellent salt spray resistance. RAPTOR Anti-Corrosive Epoxy Primer’s advanced resin technology improves adhesion to bare metal and most other prepared surfaces, and promotes intercoat performance to further extend the life of RAPTOR protective coating.

Upol Maximum 4:1 Clearcoat Kit.

admin — Tue, 10 Dec 2024 03:34:12 +0000

Upol Maximum 4:1 Clearcoat Kit.

Manufactured in Europe using high quality European resins, Maximum 4:1 Clearcoat gives a high build, crystal clear finish with exceptional gloss retention.

It’s easy to apply with excellent flow and non-sag properties and hardens rapidly to give a durable, UV resistant finish. Once cured it can be easily buffed.

Key Properties

Crystal clear finish with excellent gloss retention
Easy to apply with excellent flow and non-sag properties.
Can be used for spot or 1-4 panel repairs.
Can be applied over most water and solvent borne basecoat paints.
Air dry or low bake.

This kit includes:

1 x Maximum 4:1 Clearcoat (3.79LT)

1 x Maximum Standard Hardener (946ml)

For more information in relation to the product view the Technical Data Sheet below-

https://u-pol.com/wp-content/uploads/MAXIMUM%E2%84%A2-41-CLEARCOAT-MXMCLGAU-AU-TDS.pdf